The face of a clad wall gets the attention, but the job is won or lost behind it. Wrong battens, poor ventilation, unsuitable fixings or an untreated cut edge can turn good-looking boards into a call-back. This cladding material guide is built for tradespeople and capable DIY customers who need to match the board, the substrate and the exposure before materials arrive on site.

Start with the wall, not the board

External cladding is a system, not simply a finish fixed to a wall. Establish whether the wall is timber frame, blockwork, masonry or a rainscreen build-up, then check the condition of the substrate and the required insulation, membrane and cavity detail. Cladding sheds most of the rain, but it should not be treated as the sole weather barrier.

A ventilated cavity behind the cladding allows moisture to drain and air to circulate. This is particularly important with timber, where trapped moisture can lead to staining, movement and decay, but it matters with every material. Use suitable treated battens, allow airflow at the top and bottom of the elevation, and fit insect mesh where required without blocking ventilation.

Exposure makes a real difference. A sheltered garden office in Hertfordshire has different demands from a wind-driven, west-facing elevation or a coastal property. The board profile, overlap, fixing choice and maintenance plan should reflect that reality. It is usually cheaper to specify the right system at the start than to rectify water staining and failed fixings later.

Timber cladding: natural appearance and flexible detailing

Timber remains a strong choice for extensions, outbuildings, garden rooms, feature walls and landscaping structures. It is straightforward to cut and install, works well with bespoke details and gives a finish that many homeowners actively want. Species, grade and treatment determine how it performs.

Treated softwood is the value-led option for many projects. It suits sheds, workshops, fencing-style elevations and secondary buildings where a painted or stained finish is acceptable. For external use, choose material treated for the intended service conditions and protect all fresh cuts with an appropriate end-grain preservative. Do not assume a treatment applied before machining protects every cut made on site.

Larch and cedar offer a more naturally durable finish and are commonly selected where the timber will be left to weather. They can silver down attractively, but that weathered look is not always even. Differences in exposure, roof overhangs and splashback often create variation in colour, so set expectations with the client before installation.

Profile affects both appearance and weather resistance. Feather edge creates a traditional overlapped finish; shiplap gives a cleaner, more defined shadow line; and tongue-and-groove boards can produce a tight contemporary elevation when installed to the manufacturer’s detail. Horizontal boards are common, but vertical cladding can drain well and make low elevations appear taller. The batten direction must support the board layout while retaining a ventilated cavity.

Timber moves across its width as moisture content changes. Leave the specified expansion allowance, use boards at a suitable moisture content and avoid overdriving fixings. Stainless steel nails or screws are generally the sensible choice for external timber cladding, particularly with cedar, larch and other timbers that can react with standard steel fixings.

Composite cladding: low-maintenance, not maintenance-free

Composite cladding appeals where clients want a consistent colour and minimal repainting. It is often used on garden rooms, feature walls and residential extensions, especially where a uniform modern finish is more important than natural grain variation.

The trade-off is thermal movement. Composite boards can expand and contract more noticeably than timber, so fixing centres, starter trims, joint gaps and end clearances must follow the product specification precisely. A board that looks straight and tight on a cool morning may buckle when it heats up if movement has not been allowed for.

Composite also needs a correctly spaced support frame. Unsupported spans, uneven battens and overtightened hidden clips can show through as waviness on a finished wall. Check the recommended maximum batten centres, particularly around openings and on dark-coloured boards in full sun. Darker colours can show dust, water marks and surface heat more readily, while lighter shades may be better suited to exposed south-facing elevations.

Although composite avoids regular staining or painting, it still benefits from routine cleaning. Moss, airborne dirt and splashback can build up around low-level boards just as they can on any exterior finish. Specify it for reduced maintenance, rather than no maintenance at all.

Fibre cement and PVC: practical options for demanding elevations

Fibre cement cladding boards provide a stable, durable alternative where a crisp painted-board appearance is required. They are often chosen for gables, weatherboard-style elevations and projects where rot resistance and dimensional stability are priorities. They can be heavier and more abrasive to cut than timber, so allow for safe handling, appropriate cutting equipment and dust control.

The finished result depends on accurate set-out. Fibre cement boards need the correct lap, fixing positions and clearance from ground level. Use compatible fixings and touch-up systems where the manufacturer requires them. Do not mix components from different systems without checking suitability, as trims and fixings are part of the weathering detail.

PVC cladding is lightweight, economical and easy to clean, making it useful for soffits, fascias, small outbuildings and some domestic wall applications. Its limitations are visual as well as technical. It may not suit projects where a premium architectural finish is expected, and it also moves with temperature. Allow expansion at joints and avoid trapping boards too tightly in trims.

Metal cladding can also be the right answer for commercial units, agricultural buildings and contemporary outbuildings. It is quick to cover large areas and can be highly durable, but needs careful flashings, compatible fixings and attention to condensation control. The best material is not always the one with the highest board price or the lowest board price. It is the one that fits the wall build-up, client expectations and available installation time.

Cladding material guide: choose by performance

For a cost-conscious outbuilding, treated softwood is often hard to beat, provided the detailing and maintenance are honest from the outset. For a residential feature elevation, cedar, larch or a quality composite board may better meet the brief. For a stable weatherboard look with less concern about rot, fibre cement is worth pricing alongside timber rather than treating it as a last resort.

Maintenance expectations should be agreed in writing where possible. A client may say they want timber cladding, but what they mean is that they want a permanently uniform brown finish. Natural timber will not provide that without an ongoing coating programme. Equally, a composite board can reduce finishing work but requires more care with expansion details and can carry a higher initial material cost.

Consider the full installed cost: boards, battens, breather membrane, cavity barriers where required, trims, flashings, fixings, sealants, coatings, waste and labour. Buying the boards alone can make one option look cheaper when the complete fixing system tells a different story.

Fixing, cutting and detailing without shortcuts

Set out from a level datum and decide where full boards, joints and trims will fall before the first fixing goes in. Openings are the usual weak point. Use proper head flashings, sill details and side trims, and keep end grain or exposed board ends protected where the system requires it.

Keep cladding clear of the ground and avoid directing roof runoff onto the face of the boards. Gravel margins, gutters and sensible landscaping reduce splashback that can prematurely stain or saturate low-level timber. Where boards meet masonry, roofing or window frames, use suitable flashings and movement allowances rather than relying on a thick bead of sealant.

For timber boards, pre-drilling near ends can reduce splitting. For fibre cement, use the recommended blade and control dust properly. For composite, cut cleanly and keep boards supported during installation to avoid damage to edges and faces. Store all cladding flat, dry and protected before fitting. Wet, twisted or surface-damaged boards cost time before they ever reach the wall.

Check regulations before ordering

External wall work can involve Building Regulations requirements for fire performance, insulation, moisture control and cavity barriers. Requirements vary by building type, height, boundary position and the wider wall construction. Planning restrictions may also apply, particularly in conservation areas, on listed buildings or where a proposed finish substantially changes the appearance of a property.

Confirm the required specification with Building Control, the designer or a competent project professional before ordering. This is especially important for multi-storey properties, boundary walls and commercial work. A cladding board may be suitable in one build-up and unsuitable in another.

For trade jobs that need exact board sizes, treated battens, sheet materials for backing work or matching fixings, WelBM can help keep the order practical and site-ready. Get the wall detail right first, then buy the material that will still be performing when the scaffold has gone and the weather has had its say.

Secret Link